The Illumigo Extension is a modular mid-panel component designed to increase the width of your
Illumigo Modular 2380 Lightbox.
It connects between existing frame sections to extend your display while maintaining a seamless illuminated surface and consistent edgelit performance.
You can add multiple extension panels to a single configuration to build wider displays up to a maximum of
7.85 metres. Extensions must be positioned between main frame sections and cannot be used at the outer ends. This makes them ideal for expanding backwalls or adapting L, U and T-shaped layouts without breaking up the visual flow.
All frames are designed to be extended from smaller sizes up to larger sizes. When extending frame widths,
additional transformers
may be required (sold separately).
Choose from 850mm or 1000mm widths, both standing at 2380mm high to match the rest of the Illumigo system.
Each extension panel uses the same push-fit, tool-free assembly system as the main Illumigo frames. Horizontal LEDs are pre-installed, and a discreet power cable connects the extension to your existing Illumigo transformer without the need for a separate power source for every panel. Transformer requirements: For linear widths up to 2m and 3m, only 1 transformer is required. Widths up to 4m require 2 transformers, and any width over 4m requires 4 transformers in total.
Transformers
are available separately and should be factored into your display planning. Feet attach via thumb screws, and each unit is supplied in a wheeled protective bag with foam inserts for safe transport and compact storage. The finished Illumigo frame, complete with any extensions, uses premium 175gsm edgelit SEG fabric graphics, printed using high-definition dye sublimation for vivid colour, crisp detail and uniform light diffusion across the surface. Two graphic panels are always required – one per side of the frame – regardless of whether it is configured for single or double-sided display. For single-sided use, a plain rear graphic can be paired with an optional black light block panel (BBN) to block rear illumination and enhance forward brightness. Graphics push easily into the silicone edge channels and can be replaced quickly between campaigns.Tool-Free Assembly with Shared Power
Vibrant SEG Graphics with Light Management Options
✨ Simple, illuminated solution: Illumigo™ Modular is a backlit lightbox system designed to install inside the walls of an existing shell scheme, sitting within the footprint and using the shell structure as the perimeter. The 0.85 m modules and 2.3 m height fit snugly to create seamless inner walls with bright, even illumination for standout in busy halls. Standard frames can be expanded with 0.85 m or 1 m extensions, letting you configure the system to a wide range of shell scheme sizes and bay counts, and scale up or down as your floor plan changes through the season. Examples shown: 3x5, 3x3 and 2x6. ⚡ Quick build, easy storage: Frames lock together fast for rapid setup and takedown with a small team. Components pack compactly and include a wheeled storage bag for smooth transport. For 90° corners or L or U layouts, use the Blind Foot (ILLGO-MOD-BF) to create flush connections. 🎨 Double sided SEG graphics for light control and flexibility: Each frame accepts SEG fabric graphics on both sides. In a shell scheme the inner face is visible, while the reverse needs either a graphic or a blockout liner to prevent light spill. Printing both sides gives you options to swap panels mid event for a fresh look or to reuse the frame as a standalone display at a later stage. 📐 Examples below: The system sits close to the outer shell walls so you maximise usable space within the walled footprint. The 3x5, 3x3 and 2x6 layouts illustrate how easily it adapts to common footprints. Need help planning your shell scheme? If you would like us to work out the exact components for your stand, please click the Enquire now button and tell us your shell scheme size.3x5 shell scheme - Components
Code Description Quantity HARDWARE ILLGO-MOD-2824 2.85 m Width | 2.3 m Height Frame 2 ILLGO-MOD-4824 4.85 m Width | 2.3 m Height Frame 1 ILLGO-90TC 90° Connector (unit) 2 ILLGO-MOD-BF Blind Foot (unit) 2 ILLGO-MOD-HF Half Foot (unit) 12 GRAPHICS G-ILLGO-MOD-2824-BL 2.85 m SEG Graphic (Front & Back) 4 G-ILLGO-MOD-4824-BL 4.85 m SEG Graphic (Front & Back) 2 3x3 shell scheme - Components
Code Description Quantity HARDWARE ILLGO-MOD-2824 2.85 m Width | 2.3 m Height Frame 3 ILLGO-90TC 90° Connector (unit) 2 ILLGO-MOD-BF Blind Foot (unit) 2 ILLGO-MOD-HF Half Foot (unit) 10 GRAPHICS G-ILLGO-MOD-2824-BL 2.85 m SEG Graphic (Front & Back) 6 2x6 shell scheme - Components
Code Description Quantity HARDWARE ILLGO-MOD-5824 5.85 m Width | 2.3 m Height Frame 1 ILLGO-MOD-1824 1.85 m Width | 2.3 m Height Frame 2 ILLGO-90TC 90° Connector (unit) 2 ILLGO-MOD-BF Blind Foot (unit) 2 ILLGO-MOD-HF Half Foot (unit) 11 GRAPHICS G-ILLGO-MOD-5824-BL 5.85 m SEG Graphic 2 G-ILLGO-MOD-1824-BL 1.85 m SEG Graphic 4
Formulate LED 3M Backwall. A bright, adaptable illuminated display designed to fit your space. The Formulate LED Backwall is supplied as a full width 3m illuminated display as standard, creating an impressive visual backdrop for exhibitions, branded environments and promotional spaces. Integrated LED light blankets provide smooth, even illumination across the graphic surface, helping colours remain vibrant and imagery appear crisp and impactful. Designed for flexibility, the modular frame can also be assembled at smaller widths of 2m or 1m using the same components. Frame sections can simply be removed during assembly, allowing the display to adapt easily to different stand sizes or interior environments. This makes the system highly reusable across multiple events, giving you the ability to redress the display with new graphics while continuing to use the same frame and lighting system. The LED wall offers single sided lightbox capability as standard using a backlit SEG graphic. Alternatively, the frame can be dressed with a tension fit sock graphic, allowing the display to be used as a fabric wall with single or double sided graphics where illumination is visible from one side. Setup is quick and intuitive using push fit aluminium tubing with simple push button locks. Numbered frame sections guide the assembly process, allowing the wall to be built confidently even by first time users. The modular structure allows frame sections to be removed so the display can be assembled at 3m, 2m or 1m widths depending on the space available. Push in connectors and stabilising feet create a secure and supportive structure. The integrated LED light blankets attach neatly inside the frame and distribute light evenly across the display surface. This balanced illumination avoids hotspots while helping printed graphics appear vibrant and clear from every viewing angle. For transport, the complete system packs neatly into a padded black wheeled bag. Both side and pull handles make handling easy, while a dedicated graphic compartment allows a full size fabric graphic to be stored with the frame. The Formulate LED Backwall supports two graphic solutions, giving you flexibility depending on whether you require a fully illuminated display or a standard fabric graphic. Graphics are available for all three display widths (1m, 2m and 3m), allowing the display to be redressed when using different frame configurations. Backlit SEG Graphic Tension Fit Sock Graphic The premium 190 gsm dye sublimation printed stretch fabric is washable, foldable and easily interchangeable, making it ideal for updating branding between campaigns, exhibitions or events.
Fast Assembly, Easy Transport and Smooth LED Illumination
Graphic Options for Illuminated or Standard Display
The illuminated option uses a precision finished SEG graphic produced on 175 gsm backlit textile fabric. Printed using high definition dye sublimation, this material provides excellent colour vibrancy and allows light from the internal LED blankets to diffuse evenly across the surface. The silicone edge graphic inserts neatly into the frame channel to create a smooth, taut graphic face with a clean professional finish.
The tension fit sock graphic stretches smoothly over the tubular frame and secures with a discreet zip closure at the base. Custom printed graphics are designed to fit snugly over the structure and are available as single sided graphics with a plain white reverse, or double sided graphics for visibility from both directions.