Ultima Displays. Illumigo™ Modular | Modular LED Lightboxes for Exhibitions

Product list

New

Illumigo™ Modular Shell Scheme

Illuminated lightbox that sits within your shell scheme walls, fast and flexible

✨ Simple, illuminated solution: Illumigo™ Modular is a backlit lightbox system designed to install inside the walls of an existing shell scheme, sitting within the footprint and using the shell structure as the perimeter. The 0.85 m modules and 2.3 m height fit snugly to create seamless inner walls with bright, even illumination for standout in busy halls. Standard frames can be expanded with 0.85 m or 1 m extensions, letting you configure the system to a wide range of shell scheme sizes and bay counts, and scale up or down as your floor plan changes through the season. Examples shown: 3x5, 3x3 and 2x6.

⚡ Quick build, easy storage: Frames lock together fast for rapid setup and takedown with a small team. Components pack compactly and include a wheeled storage bag for smooth transport. For 90° corners or L or U layouts, use the Blind Foot (ILLGO-MOD-BF) to create flush connections.

🎨 Double sided SEG graphics for light control and flexibility: Each frame accepts SEG fabric graphics on both sides. In a shell scheme the inner face is visible, while the reverse needs either a graphic or a blockout liner to prevent light spill. Printing both sides gives you options to swap panels mid event for a fresh look or to reuse the frame as a standalone display at a later stage.

📐 Examples below: The system sits close to the outer shell walls so you maximise usable space within the walled footprint. The 3x5, 3x3 and 2x6 layouts illustrate how easily it adapts to common footprints.

3x5 shell scheme - Components

Code	Description	Quantity
HARDWARE
ILLGO-MOD-2824	2.85 m Width \| 2.3 m Height Frame	2
ILLGO-MOD-4824	4.85 m Width \| 2.3 m Height Frame	1
ILLGO-90TC	90° Connector (unit)	2
ILLGO-MOD-BF	Blind Foot (unit)	2
ILLGO-MOD-HF	Half Foot (unit)	12
GRAPHICS
G-ILLGO-MOD-2824-BL	2.85 m SEG Graphic (Front & Back)	4
G-ILLGO-MOD-4824-BL	4.85 m SEG Graphic (Front & Back)	2

3x3 shell scheme - Components

Code	Description	Quantity
HARDWARE
ILLGO-MOD-2824	2.85 m Width \| 2.3 m Height Frame	3
ILLGO-90TC	90° Connector (unit)	2
ILLGO-MOD-BF	Blind Foot (unit)	2
ILLGO-MOD-HF	Half Foot (unit)	10
GRAPHICS
G-ILLGO-MOD-2824-BL	2.85 m SEG Graphic (Front & Back)	6

2x6 shell scheme - Components

Code	Description	Quantity
HARDWARE
ILLGO-MOD-5824	5.85 m Width \| 2.3 m Height Frame	1
ILLGO-MOD-1824	1.85 m Width \| 2.3 m Height Frame	2
ILLGO-90TC	90° Connector (unit)	2
ILLGO-MOD-BF	Blind Foot (unit)	2
ILLGO-MOD-HF	Half Foot (unit)	11
GRAPHICS
G-ILLGO-MOD-5824-BL	5.85 m SEG Graphic	2
G-ILLGO-MOD-1824-BL	1.85 m SEG Graphic	4

Need help planning your shell scheme? If you would like us to work out the exact components for your stand, please click the Enquire now button and tell us your shell scheme size.

New

Illumigo™ Modular | Lite Mag Connectors

Create Dramatic Displays with Illumigo™ Connectors

Take your Illumigo™ Modular | Lite Mag lightbox system to the next level with purpose-built connectors designed to create impactful, multi-sided displays. Whether you are building an L-shaped corner, U-shaped layout or T-formation, these robust accessories allow you to join frames seamlessly and securely - perfect for exhibitions, retail and promotional environments that demand creativity and flexibility.

The connectors lock securely without tools, ensuring optimal stability. The ideal solution for creating impactful, modular, and professional configurations with ease.

90° Top Corner Connector (ILLGO-90TC) – for seamless corner joins

The 90° Top Corner Connector enables two Illumigo™ Modular or Illumigo™ Lite Mag frames to be securely joined at the top, forming a clean and stable corner for L-shaped or U-shaped configurations.

Compatible with: Illumigo™ Modular and Illumigo™ Lite Mag

Supplied as a single unit. It features an integrated locking mechanism for a secure and simple connection between frames.

Technical Notes:
– For Illumigo™ Modular, must be used with a blind foot at the bottom (ILLGO-MOD-BF)
– Modular: 120 mm of the graphic on one frame will be hidden
– Lite Mag: 80 mm of the graphic on one frame will be hidden

90° Middle Inside Corner Connector (ILLGO-90MIC) – internal corner reinforcement

The 90° Middle Inside Corner Connectors allow two Illumigo™ Lite Mag frames to be joined at a 90° angle without any graphic overlap. Designed to strengthen internal joins, they improve stability in U-shaped and multi-panel configurations.

Compatible with: Illumigo™ Lite Mag

Supplied as a pack of 4. Enough to secure a single 90-degree inside corner at the middle channel of two joined frames.

Technical Notes:
– No graphic overlap between frames
– An 80 × 80 mm space remains at the rear corner once assembled

T-Shape Connector (ILLGO-TC) – create multi-directional displays

The T-Shape Connector allows you to link two Illumigo™ Modular or Illumigo™ Lite Mag frames into a T-shaped formation, adding versatility and visual impact to your display.

Compatible with: Illumigo™ Modular and Illumigo™ Lite Mag

Supplied as a single unit. Includes an integrated locking mechanism to ensure a firm and flush join across all three sections.

Technical Notes:
– For Illumigo™ Modular, can be used with a blind foot (ILLGO-MOD-BF) depending on configuration

90° Middle Inside Corner Connectors (ILLGO-MOD-90MIC) – Modular internal support

The 90° Middle Inside Corner Connectors are designed for the Illumigo™ Modular 120 mm profile, providing essential internal support at right-angle joins. Ideal for U-shaped and multi-panel layouts where additional rigidity is required.

Compatible with: Illumigo™ Modular

Supplied as a pack of 4. Enough to secure a single 90-degree inside corner at the middle channel of two joined frames.

Technical Notes:
– Finished in white to match the frame system
– A 120 × 120 mm space remains at the rear corner once assembled

New

Illumigo™ Modular Feet

Specialist Foot Options for Creative Illumigo Modular Setups

Optimise your Illumigo Modular display layout with specialist foot accessories designed for space-conscious and angled configurations. These premium feet are built to the same structural standard as the core system and offer targeted solutions when positioning frames against walls or connecting at right angles.

Both options are sold individually and are compatible with all standard Illumigo Modular frames and extension panels.

Half Foot – Maximise Space Against Walls

The Illumigo Half Foot is ideal when placing your modular lightbox directly against a wall. With its reduced depth, it minimises the footprint of the display while maintaining stability - perfect for retail, shell scheme setups, or tight event spaces where every millimetre counts.

Sold as a single unit, it can be used alongside a standard foot or paired with another Half Foot for a flush wall-facing finish.

Blind Foot – Join Frames at a 90° Angle

The Blind Foot is specifically designed for use in corner configurations where two frames are joined at 90°. It replaces one of the adjoining feet to allow a clean, flush connection without interference - ideal for creating seamless L-shaped or U-shaped structures.

Durable and discreet, the Blind Foot provides reliable stability while enhancing the visual continuity of your angled setup. Sold as a single unit.

Illumigo™ Modular / Illumigo™ Lite Mag A4 Literature Holder

Accessorize your Illumigo™ Lite Mag | Modular frames with our dedicated A4 document holder! Add the finishing touch to your display with this must-have accessory!

Illumigo™ Modular Transformer

IllumiGO™ Modular Transformer - Power Supply for Edge-Lit Frames

Designed specifically for the IllumiGO™ modular display system, this high-performance power supply delivers reliable, consistent power for seamless illumination across your setup. Engineered for durability and ease of use, the unit combines a robust AC/DC transformer with an extended cable system, giving you the flexibility required for exhibition stands, retail displays, and event environments.

The transformer provides a stable 24V DC output, ensuring optimal performance for LED illumination while maintaining efficiency and safety. Supplied with a European IEC mains lead and a UK plug adaptor, this unit is ready for immediate use across UK and EU environments.

A professional-grade DC barrel connector (5.5 mm outer diameter / 2.1 mm inner diameter) ensures secure and compatible connection to your IllumiGO™ system. With a total cable length of 3 metres, installation is straightforward, even when power sources are positioned away from the display.

Ideal as a replacement or spare, this transformer ensures your IllumiGO™ system remains powered, reliable, and exhibition-ready at all times.

How Many Transformers Are Required?

When expanding the width of your IllumiGO™ Modular display using extensions, additional transformers may be required to power the LED lighting. The number needed depends on the total width of your frame setup. Use the guide below to plan your requirements.

Transformer requirements by display width
Display Width	Transformers Required
Up to 3 m	1
Up to 4 m	2
Up to 4.8 m	3
From 4.85 m to 7.85 m	4

Illumigo™ Modular

Illumigo™ Modular LED Lightboxes for Exhibitions, Retail and Promotional Displays

Create striking illuminated displays with the Illumigo™ Modular LED Lightbox System, a versatile range of modular lightboxes designed to deliver maximum visual impact. Whether you need a single illuminated display, a seamless exhibition backwall or a creative multi-sided configuration, Illumigo™ Modular combines premium edge-lit LED technology with interchangeable SEG fabric graphics to create eye-catching displays that elevate your brand.

Designed for flexibility and reuse, the modular system can be configured as a standalone LED lightbox or expanded into seamless illuminated walls measuring up to 7.85 metres wide. A choice of frame widths, extension panels and optional connectors allows you to build impressive L, T and U-shaped displays, making it easy to adapt your exhibition stand or retail environment for different events, campaigns and spaces.

Ideal for exhibitions, shell schemes, retail displays, shopping centres, showrooms, product launches, reception areas, conferences and promotional events, Illumigo™ Modular transforms ordinary spaces into vibrant branded environments. The slim aluminium frame, brilliant edge-lit LEDs and seamless SEG graphics deliver a premium appearance while remaining lightweight, portable and easy to transport.

Assembly is fast and completely tool-free, with numbered push-fit frame sections and pre-installed LED lighting helping to reduce installation time. Replaceable SEG fabric graphics make it simple to refresh your branding for seasonal campaigns, product launches or new promotions, while the reusable hardware provides a sustainable and cost-effective solution that continues to deliver value event after event.

Whether you are creating an illuminated shell scheme, a large exhibition backwall or a bespoke modular exhibition display, the Illumigo™ Modular Lightbox range offers the flexibility, scalability and professional finish needed to help your brand stand out in any environment.