Products tagged with 'expositor com leds'
Illumigo™ Modular Extension 2380(H) mm
The Illumigo Extension is a modular mid-panel component designed to increase the width of your
Illumigo Modular 2380 Lightbox.
It connects between existing frame sections to extend your display while maintaining a seamless illuminated surface and consistent edgelit performance.
You can add multiple extension panels to a single configuration to build wider displays up to a maximum of
7.85 metres. Extensions must be positioned between main frame sections and cannot be used at the outer ends. This makes them ideal for expanding backwalls or adapting L, U and T-shaped layouts without breaking up the visual flow.
All frames are designed to be extended from smaller sizes up to larger sizes. When extending frame widths,
additional transformers
may be required (sold separately).
Choose from 850mm or 1000mm widths, both standing at 2380mm high to match the rest of the Illumigo system.
Each extension panel uses the same push-fit, tool-free assembly system as the main Illumigo frames. Horizontal LEDs are pre-installed, and a discreet power cable connects the extension to your existing Illumigo transformer without the need for a separate power source for every panel. Transformer requirements: For linear widths up to 2m and 3m, only 1 transformer is required. Widths up to 4m require 2 transformers, and any width over 4m requires 4 transformers in total.
Transformers
are available separately and should be factored into your display planning. Feet attach via thumb screws, and each unit is supplied in a wheeled protective bag with foam inserts for safe transport and compact storage. The finished Illumigo frame, complete with any extensions, uses premium 175gsm edgelit SEG fabric graphics, printed using high-definition dye sublimation for vivid colour, crisp detail and uniform light diffusion across the surface. Two graphic panels are always required – one per side of the frame – regardless of whether it is configured for single or double-sided display. For single-sided use, a plain rear graphic can be paired with an optional black light block panel (BBN) to block rear illumination and enhance forward brightness. Graphics push easily into the silicone edge channels and can be replaced quickly between campaigns.Tool-Free Assembly with Shared Power
Vibrant SEG Graphics with Light Management Options
Illumigo™ Modular Shell Scheme
✨ Simple, illuminated solution: Illumigo™ Modular is a backlit lightbox system designed to install inside the walls of an existing shell scheme, sitting within the footprint and using the shell structure as the perimeter. The 0.85 m modules and 2.3 m height fit snugly to create seamless inner walls with bright, even illumination for standout in busy halls. Standard frames can be expanded with 0.85 m or 1 m extensions, letting you configure the system to a wide range of shell scheme sizes and bay counts, and scale up or down as your floor plan changes through the season. Examples shown: 3x5, 3x3 and 2x6. ⚡ Quick build, easy storage: Frames lock together fast for rapid setup and takedown with a small team. Components pack compactly and include a wheeled storage bag for smooth transport. For 90° corners or L or U layouts, use the Blind Foot (ILLGO-MOD-BF) to create flush connections. 🎨 Double sided SEG graphics for light control and flexibility: Each frame accepts SEG fabric graphics on both sides. In a shell scheme the inner face is visible, while the reverse needs either a graphic or a blockout liner to prevent light spill. Printing both sides gives you options to swap panels mid event for a fresh look or to reuse the frame as a standalone display at a later stage. 📐 Examples below: The system sits close to the outer shell walls so you maximise usable space within the walled footprint. The 3x5, 3x3 and 2x6 layouts illustrate how easily it adapts to common footprints. Need help planning your shell scheme? If you would like us to work out the exact components for your stand, please click the Enquire now button and tell us your shell scheme size.3x5 shell scheme - Components
Code Description Quantity HARDWARE ILLGO-MOD-2824 2.85 m Width | 2.3 m Height Frame 2 ILLGO-MOD-4824 4.85 m Width | 2.3 m Height Frame 1 ILLGO-90TC 90° Connector (unit) 2 ILLGO-MOD-BF Blind Foot (unit) 2 ILLGO-MOD-HF Half Foot (unit) 12 GRAPHICS G-ILLGO-MOD-2824-BL 2.85 m SEG Graphic (Front & Back) 4 G-ILLGO-MOD-4824-BL 4.85 m SEG Graphic (Front & Back) 2 3x3 shell scheme - Components
Code Description Quantity HARDWARE ILLGO-MOD-2824 2.85 m Width | 2.3 m Height Frame 3 ILLGO-90TC 90° Connector (unit) 2 ILLGO-MOD-BF Blind Foot (unit) 2 ILLGO-MOD-HF Half Foot (unit) 10 GRAPHICS G-ILLGO-MOD-2824-BL 2.85 m SEG Graphic (Front & Back) 6 2x6 shell scheme - Components
Code Description Quantity HARDWARE ILLGO-MOD-5824 5.85 m Width | 2.3 m Height Frame 1 ILLGO-MOD-1824 1.85 m Width | 2.3 m Height Frame 2 ILLGO-90TC 90° Connector (unit) 2 ILLGO-MOD-BF Blind Foot (unit) 2 ILLGO-MOD-HF Half Foot (unit) 11 GRAPHICS G-ILLGO-MOD-5824-BL 5.85 m SEG Graphic 2 G-ILLGO-MOD-1824-BL 1.85 m SEG Graphic 4
Fastframe™ LED Lightbox 1000x2000mm
Fastframe™ LED Lightbox is a lightweight, reusable illuminated frame designed to integrate with the Fastframe™ modular display range. Use it to add illuminated accents and eye-catching feature areas to exhibition stands, branded environments, media walls, retail displays, and promotional spaces. Pre-assembled for convenience and fast setup, it can be incorporated into new or existing Fastframe™ layouts, giving you even more creative flexibility from your display system. Designed to grow and evolve with your display requirements, Fastframe™ LED Lightbox makes it easy to introduce illumination exactly where you want it. Highlight key branding, messaging, products, or focal areas with a single illuminated feature frame, combine multiple Lightboxes for greater visual impact, or mix illuminated and non-illuminated frames to create striking exhibition stands and branded environments. Using the extensive range of Fastframe™ Feet, Connectors, and accessories, you can create unique shapes and configurations and adapt your setup to suit different venues and exhibition spaces. Non-illuminated Fastframe™ frames can be used to create larger seamless graphic backwalls, while Fastframe™ LED Lightboxes can be incorporated as illuminated accent and feature frames to add contrast and visual impact. Each LED Lightbox uses an individual graphic and is designed as a distinct illuminated feature rather than as part of a seamless graphic backwall. Integrated LED lighting is positioned within the side profile of the frame, delivering bright, even illumination across the graphic surface for vibrant, eye-catching branded displays. Frame Size: 1000mm Wide x 2000mm High. Compatible with other 2000mm high Fastframe™ frames and Lightboxes. Double-Sided Unit: requires 2 x graphics. Fastframe™ LED Lightbox arrives pre-assembled for fast and simple setup. Simply unfold the frame, raise to height, and lock into place using the central support rod before connecting the power supply to create a professional illuminated display in just minutes. Constructed from lightweight anodised aluminium with durable nylon ABS plastic corner components, the frame is strong yet easy to handle, transport, and store. The integrated support rod provides added stability, while the twist-out feet and collapsible design ensure fast, tool-free setup. Fastframe™ LED Lightbox can be linked with additional Fastframe™ LED Lightbox and Fastframe™ frames using compatible Connectors and display accessories, allowing illuminated feature frames to be incorporated into larger modular layouts and customised exhibition configurations. The collapsible frame packs neatly into a wheeled polyester carry bag with protective foam inserts for safe storage and easy transportation between events, exhibitions, and promotional environments. Designed for repeated long-term use, the reusable frame system and interchangeable SEG graphics provide a sustainable display solution that can adapt and evolve alongside the changing display requirements of your business. Fastframe™ LED Lightbox uses premium SEG fabric graphics to create vibrant illuminated features that stand out in busy exhibition halls, retail environments, showrooms, and promotional spaces. 175gsm Premium Backlit SEG Fabric is printed using high-definition dye sublimation to achieve vivid colour reproduction, sharp detail, and an evenly illuminated glow. Designed specifically for lightbox applications, the material allows light to diffuse evenly through the graphic for maximum visual impact. For single-sided displays, a Black Back Panel (BBN) can be fitted to the rear of the frame. The opaque black fabric prevents light leakage from the reverse side, helping to maximise brightness, contrast, and visual impact on the front-facing graphic. Graphics push-fit into the frame channel for a smooth, taut finish and can be quickly replaced between campaigns, making it easy to refresh messaging without replacing the display hardware. Double-Sided Unit: requires 2 x graphics. Each Fastframe™ LED Lightbox uses an individual SEG graphic, making it easy to refresh individual illuminated features as your campaign, messaging, or display layout changes.
Effortless Assembly, Construction, Portability & Storage
Backlit SEG Fabric Graphics & Display Benefits
Fastframe™ LED Lightbox 1000x2400mm
Fastframe™ LED Lightbox is a lightweight, reusable illuminated frame designed to integrate with the Fastframe™ modular display range. Use it to add illuminated accents and eye-catching feature areas to exhibition stands, branded environments, media walls, retail displays, and promotional spaces. Pre-assembled for convenience and fast setup, it can be incorporated into new or existing Fastframe™ layouts, giving you even more creative flexibility from your display system. Designed to grow and evolve with your display requirements, Fastframe™ LED Lightbox makes it easy to introduce illumination exactly where you want it. Highlight key branding, messaging, products, or focal areas with a single illuminated feature frame, combine multiple Lightboxes for greater visual impact, or mix illuminated and non-illuminated frames to create striking exhibition stands and branded environments. Using the extensive range of Fastframe™ Feet, Connectors, and accessories, you can create unique shapes and configurations and adapt your setup to suit different venues and exhibition spaces. Non-illuminated Fastframe™ frames can be used to create larger seamless graphic backwalls, while Fastframe™ LED Lightboxes can be incorporated as illuminated accent and feature frames to add contrast and visual impact. Each LED Lightbox uses an individual graphic and is designed as a distinct illuminated feature rather than as part of a seamless graphic backwall. Integrated LED lighting is positioned within the side profile of the frame, delivering bright, even illumination across the graphic surface for vibrant, eye-catching branded displays. Frame Size: 1000mm Wide x 2400mm High. Compatible with other 2400mm high Fastframe™ frames and Lightboxes. Double-Sided Unit: requires 2 x graphics. Fastframe™ LED Lightbox arrives pre-assembled for fast and simple setup. Simply unfold the frame, raise to height, and lock into place using the central support rod before connecting the power supply to create a professional illuminated display in just minutes. Constructed from lightweight anodised aluminium with durable nylon ABS plastic corner components, the frame is strong yet easy to handle, transport, and store. The integrated support rod provides added stability, while the twist-out feet and collapsible design ensure fast, tool-free setup. Fastframe™ LED Lightbox can be linked with additional Fastframe™ LED Lightbox and Fastframe™ frames using compatible Connectors and display accessories, allowing illuminated feature frames to be incorporated into larger modular layouts and customised exhibition configurations. The collapsible frame packs neatly into a wheeled polyester carry bag with protective foam inserts for safe storage and easy transportation between events, exhibitions, and promotional environments. Designed for repeated long-term use, the reusable frame system and interchangeable SEG graphics provide a sustainable display solution that can adapt and evolve alongside the changing display requirements of your business. Fastframe™ LED Lightbox uses premium SEG fabric graphics to create vibrant illuminated features that stand out in busy exhibition halls, retail environments, showrooms, and promotional spaces. 175gsm Premium Backlit SEG Fabric is printed using high-definition dye sublimation to achieve vivid colour reproduction, sharp detail, and an evenly illuminated glow. Designed specifically for lightbox applications, the material allows light to diffuse evenly through the graphic for maximum visual impact. For single-sided displays, a Black Back Panel (BBN) can be fitted to the rear of the frame. The opaque black fabric prevents light leakage from the reverse side, helping to maximise brightness, contrast, and visual impact on the front-facing graphic. Graphics push-fit into the frame channel for a smooth, taut finish and can be quickly replaced between campaigns, making it easy to refresh messaging without replacing the display hardware. Double-Sided Unit: requires 2 x graphics. Each Fastframe™ LED Lightbox uses an individual SEG graphic, making it easy to refresh individual illuminated features as your campaign, messaging, or display layout changes.
Effortless Assembly, Construction, Portability & Storage
Backlit SEG Fabric Graphics & Display Benefits
Fastframe™ LED Lightbox 1000x2500mm
Fastframe™ LED Lightbox is a lightweight, reusable illuminated frame designed to integrate with the Fastframe™ modular display range. Use it to add illuminated accents and eye-catching feature areas to exhibition stands, branded environments, media walls, retail displays, and promotional spaces. Pre-assembled for convenience and fast setup, it can be incorporated into new or existing Fastframe™ layouts, giving you even more creative flexibility from your display system. Designed to grow and evolve with your display requirements, Fastframe™ LED Lightbox makes it easy to introduce illumination exactly where you want it. Highlight key branding, messaging, products, or focal areas with a single illuminated feature frame, combine multiple Lightboxes for greater visual impact, or mix illuminated and non-illuminated frames to create striking exhibition stands and branded environments. Using the extensive range of Fastframe™ Feet, Connectors, and accessories, you can create unique shapes and configurations and adapt your setup to suit different venues and exhibition spaces. Non-illuminated Fastframe™ frames can be used to create larger seamless graphic backwalls, while Fastframe™ LED Lightboxes can be incorporated as illuminated accent and feature frames to add contrast and visual impact. Each LED Lightbox uses an individual graphic and is designed as a distinct illuminated feature rather than as part of a seamless graphic backwall. Integrated LED lighting is positioned within the side profile of the frame, delivering bright, even illumination across the graphic surface for vibrant, eye-catching branded displays. Frame Size: 1000mm Wide x 2500mm High. Compatible with other 2500mm high Fastframe™ frames and Lightboxes. Double-Sided Unit: requires 2 x graphics. Fastframe™ LED Lightbox arrives pre-assembled for fast and simple setup. Simply unfold the frame, raise to height, and lock into place using the central support rod before connecting the power supply to create a professional illuminated display in just minutes. Constructed from lightweight anodised aluminium with durable nylon ABS plastic corner components, the frame is strong yet easy to handle, transport, and store. The integrated support rod provides added stability, while the twist-out feet and collapsible design ensure fast, tool-free setup. Fastframe™ LED Lightbox can be linked with additional Fastframe™ LED Lightbox and Fastframe™ frames using compatible Connectors and display accessories, allowing illuminated feature frames to be incorporated into larger modular layouts and customised exhibition configurations. The collapsible frame packs neatly into a wheeled polyester carry bag with protective foam inserts for safe storage and easy transportation between events, exhibitions, and promotional environments. Designed for repeated long-term use, the reusable frame system and interchangeable SEG graphics provide a sustainable display solution that can adapt and evolve alongside the changing display requirements of your business. Fastframe™ LED Lightbox uses premium SEG fabric graphics to create vibrant illuminated features that stand out in busy exhibition halls, retail environments, showrooms, and promotional spaces. 175gsm Premium Backlit SEG Fabric is printed using high-definition dye sublimation to achieve vivid colour reproduction, sharp detail, and an evenly illuminated glow. Designed specifically for lightbox applications, the material allows light to diffuse evenly through the graphic for maximum visual impact. For single-sided displays, a Black Back Panel (BBN) can be fitted to the rear of the frame. The opaque black fabric prevents light leakage from the reverse side, helping to maximise brightness, contrast, and visual impact on the front-facing graphic. Graphics push-fit into the frame channel for a smooth, taut finish and can be quickly replaced between campaigns, making it easy to refresh messaging without replacing the display hardware. Double-Sided Unit: requires 2 x graphics. Each Fastframe™ LED Lightbox uses an individual SEG graphic, making it easy to refresh individual illuminated features as your campaign, messaging, or display layout changes.
Effortless Assembly, Construction, Portability & Storage
Backlit SEG Fabric Graphics & Display Benefits
illumiGLOW 1000X2000/2400
RGB Illuminated Display Frame Designed for Standout Visual Impact IllumiGLOW 1024 brings a new dimension of light, colour and visual theatre to freestanding displays. Its 40mm wide RGB illuminated outer frame creates a striking perimeter of light around the graphic, adding depth, atmosphere and visual impact across exhibitions, retail and promotional environments. More than simply an illuminated edge, the RGB frame becomes part of the creative presentation. Choose colours to complement your brand or campaign, adjust the brightness to suit the environment, introduce dynamic lighting effects and movement, or synchronise multiple IllumiGLOW frames from one remote to create coordinated lighting across larger displays and installations. IllumiGLOW is available in two versions: RGB Illuminated Frame RGB Illuminated Frame + LED Lightbox One frame, two display heights. The modular IllumiGLOW 1024 can be used at its full 1000 x 2400mm size or reduced to 1000 x 2000mm by removing the centre frame sections during assembly. This gives you the flexibility to adapt the same display for different venues, stand layouts and promotional environments. Double-Sided Unit: requires 2 x graphics. Use the supplied remote control to adjust the lighting to suit your branding, campaign or surrounding environment. The RGB frame can be used as a subtle colour accent or as a more dynamic lighting feature designed to attract attention. Assembly is quick and straightforward, using tool-free connections, easy-latch fittings and integrated feet. The modular IllumiGLOW 1024 frame is supplied in a 1000 x 2400mm configuration but can be reduced to 1000 x 2000mm by removing the centre frame sections during assembly, giving you two display heights from a single system. For transport and storage, the system is supplied in a heavy-duty ABS hard-shell case with protective EVA foam inserts. Integrated wheels and handles make the case easy to move between locations, while the robust construction helps protect and securely store the frame components when not in use. IllumiGLOW 1024 Polyester Stretch SEG Graphic Blackout SEG Graphic Order 2 x printed Polyester Stretch SEG graphics or 2 x printed Blackout SEG graphics – one for the front and one for the reverse . Order 1 x printed Polyester Stretch SEG graphic or 1 x printed Blackout SEG graphic for the front. IllumiGLOW LED 1024 – Lightbox Backlit SEG Graphic Backlit Blockout SEG Liner – Non-Printed Order 2 x printed Backlit SEG graphics – one for the front and one for the reverse – to create an illuminated graphic on both sides. Order 1 x printed Backlit SEG graphic for the front and 1 x unprinted Backlit Blockout SEG Liner for the reverse. Model availability: UK – IllumiGLOW 1024 (2.4m). Europe & export – IllumiGLOW 1025 (2.5m).
The RGB illuminated outer frame adds colour and lighting effects around the perimeter of the SEG graphic, while the graphic itself remains non-illuminated.
Hardware code: ILLGLOW-1024
The same RGB illuminated outer frame is combined with internal LED edge lighting, creating a fully illuminated lightbox with a backlit SEG graphic.
Hardware code: ILLGLOW-LED-1024RGB Lighting Effects and Synchronised Displays
The RGB illuminated outer frame is the defining feature of IllumiGLOW, adding colour, movement and visual impact around the edge of your graphics.
Multiple IllumiGLOW frames can be grouped and controlled from one remote, allowing colours and lighting effects to work together across exhibition stands, retail installations and larger branded environments.
Tool-Free Assembly, Safe Storage and Adjustable Height
Graphic Options for Single and Double-Sided Displays
The printed Polyester Stretch SEG graphic creates a smooth, tensioned display face with vibrant colour and sharp detail. The stretch fabric is lightweight, foldable and easy to handle, while the silicone edging fits neatly into the frame channel for a clean, professional finish. Graphics are simple to transport, store and change when updating your campaign or branding.
The printed Blackout SEG graphic features a black backing designed to reduce light show-through, improve opacity and enhance colour intensity in brighter environments.
The printed Backlit SEG graphic is designed specifically for illuminated displays, allowing light from the internal LEDs to diffuse evenly through the fabric. This produces a bright, evenly illuminated graphic with vibrant colours and strong visual impact, while the silicone edging fits securely into the frame channel to maintain a smooth, taut display face.
For single-sided lightbox displays, an unprinted Backlit Blockout SEG Liner is fitted to the reverse. The light-blocking material prevents illumination escaping through the back of the display, helping direct the available light towards the printed front graphic for improved brightness and more consistent illumination.
