Products tagged with 'indoor display'
Illumigo™ Up
The Illumigo™ Up combines bold LED illumination, vibrant edge-to-edge SEG graphics, and a sleek, frameless design for maximum visual impact. This double-sided, 1 × 2 m LED lightbox ensures visibility from all angles. The pre-assembled scissor frame sets up in minutes, and built-in magnets let you connect multiple units to create striking backwalls. Optional connectors allow for T-shapes or 90-degree angles, perfect for adding dimension to your display. Graphics are easy to swap, so your message can evolve with your brand. Designed for simplicity, the Illumigo™ Up sets up in just minutes. Just remove it from the compartmentalised carry bag, twist out the feet, and expand the folding frame to full height, then secure it with the horizontal support bar. Built-in magnets make it easy to align multiple units, while optional connectors let you lock in angled arrangements for extra impact. When it’s time to pack down, everything fits neatly into a compact wheeled carry case, making transport effortless, whether you're rolling into a trade show or heading to your next event. Add the optional A4 literature holder to keep brochures or printed materials within easy reach, ideal for exhibitions, events, or retail environments. Create stunning visuals with backlit SEG (Silicone Edge Graphics), printed via dye sublimation for exceptional image clarity and vibrant colours, perfect for retail, exhibitions, or any illuminated display. Each setup, single-sided or double-sided, uses two pieces of fabric: one for the front-facing graphic and one for the rear panel. Double-Sided Display: This setup delivers your message in both directions, ideal for open spaces and high foot traffic areas where visibility from both sides matters. Single-Sided Display:Effortless Setup & Easy Transport
Single or Double-Sided Display Options
Illumigo™ Modular 2380(H) mm
The Illumigo Modular is a striking large-format illuminated display system, standing at 2380 mm high and engineered for exceptional visual impact. Designed with flexibility in mind, it delivers seamless edge-lit SEG graphics across widths up to 7.85 metres, making it a standout choice for retail spaces, exhibitions and promotional environments, all without the premium price tag. Whether you are creating a wide backwall or an immersive multi-sided layout, the system supports large-scale continuous displays and dynamic configurations. Five frame widths are available: 1850 mm, 2850 mm, 3850 mm, 4850 mm and 5850 mm, alongside two extension panels (850 mm and 1000 mm), which accommodate seamless graphics across multiple sections. The sleek, 120 mm deep aluminium profile is powder coated in white for a clean, professional finish. Make a bold visual statement with L, T and U-shaped structures that showcase illuminated graphics from multiple angles. With three connector types (sold separately), it is easy to build creative shaped configurations that turn heads. Two optional foot styles provide added stability and aesthetic flexibility, and an A4 literature holder (sold separately) is available to complete your setup. Double-sided unit: requires 2 graphics. Assembly is quick and straightforward thanks to a push-fit frame system with pre-installed, energy-efficient horizontal LEDs. Clearly numbered sections and thumb screws for the feet simplify setup, making it ideal for small teams or rapid installations. Discreet power cables run to a transformer, then to a standard mains plug. Each frame comes with feet as standard. For added convenience, each unit is supplied in a premium black carry bag with protective foam inserts, a carry handle, shoulder strap and integrated wheels, ensuring safe, practical transport and compact storage between uses. The Illumigo Modular supports two graphic options. The primary option is 175 gsm premium backlit SEG fabric, printed using high-definition dye sublimation to achieve vivid colour, sharp detail and an evenly illuminated glow, ideal for high-impact branding in busy environments. For single-sided displays, a black back panel (BBN) is also available. This solid black SEG fabric prevents light leakage from the rear, enhancing contrast and brightness on the front-facing graphic. Graphics push-fit into the frame channel for a smooth, taut finish, and can be updated between campaigns. For double-sided use, order 2 graphics.Fast Tool-Free Assembly and Compact Storage
Backlit Graphics with High-Definition Dye Sublimation
Illumigo 2480(H) Not Available in the UK
The Illumigo Modular is a striking large-format illuminated display system, standing at 2480mm high and engineered for exceptional visual impact. Designed with flexibility in mind, it delivers seamless edgelit SEG graphics across widths of up to 7.85 metres, making it a standout choice for retail spaces, exhibitions, shell schemes and promotional environments, all without the premium price tag. Whether you're creating a wide backwall or an immersive multi-sided layout, the system supports large-scale continuous displays and dynamic configurations. Five frame widths are available — 1850mm, 2850mm, 3850mm, 4850mm, and 5850mm — alongside two extension panels (850mm and 1000mm), which can accommodate seamless graphics across multiple sections. The sleek, 120mm deep aluminium profile is powder coated in white for a clean, professional finish. Make a bold visual statement with striking L-, T-, and U-shaped structures that showcase your illuminated graphics from multiple angles. With three connector types (sold separately), it’s easy to build creative, shaped configurations that turn heads. Two optional foot styles provide added stability and aesthetic flexibility, and an A4 literature holder (sold separately) is available to complete your setup. Assembly is quick and straightforward thanks to a push-fit frame system with pre-installed, energy-efficient horizontal LEDs. Clearly numbered sections and thumb screws for the feet simplify setup, making it ideal for small teams or rapid installations. Discreet power cables run to a transformer, then to a standard mains plug. Each frame comes with feet as standard. For added convenience, each unit is supplied in a premium black carry bag with protective foam inserts, a carry handle, shoulder strap, and integrated wheels — ensuring safe, practical transport and compact storage between uses. The Illumigo Modular supports two graphic options. The primary option is 175gsm premium backlit SEG fabric, printed using high-definition dye sublimation to achieve vivid colour, sharp detail, and an evenly illuminated glow — ideal for high-impact branding in busy environments. For single-sided displays, a black back panel (BBN) is also available. This solid black SEG fabric prevents light leakage from the rear, enhancing contrast and brightness on the front-facing graphic. Graphics are push-fit into the frame channel for a smooth, taut finish, and can be easily updated or swapped out between campaigns. For double-sided use, simply order 2 x graphics.
Not available in the UK – please login to view
2380H Illumigo Modular
Fast Tool-Free Assembly and Compact Storage
Backlit Graphics with High-Definition Dye Sublimation
Illumigo™ Modular Extension 2380(H) mm
The Illumigo Extension is a modular mid-panel component designed to increase the width of your
Illumigo Modular 2380 Lightbox.
It connects between existing frame sections to extend your display while maintaining a seamless illuminated surface and consistent edgelit performance.
You can add multiple extension panels to a single configuration to build wider displays up to a maximum of
7.85 metres. Extensions must be positioned between main frame sections and cannot be used at the outer ends. This makes them ideal for expanding backwalls or adapting L, U and T-shaped layouts without breaking up the visual flow.
All frames are designed to be extended from smaller sizes up to larger sizes. When extending frame widths,
additional transformers
may be required (sold separately).
Choose from 850mm or 1000mm widths, both standing at 2380mm high to match the rest of the Illumigo system.
Each extension panel uses the same push-fit, tool-free assembly system as the main Illumigo frames. Horizontal LEDs are pre-installed, and a discreet power cable connects the extension to your existing Illumigo transformer without the need for a separate power source for every panel. Transformer requirements: For linear widths up to 2m and 3m, only 1 transformer is required. Widths up to 4m require 2 transformers, and any width over 4m requires 4 transformers in total.
Transformers
are available separately and should be factored into your display planning. Feet attach via thumb screws, and each unit is supplied in a wheeled protective bag with foam inserts for safe transport and compact storage. The finished Illumigo frame, complete with any extensions, uses premium 175gsm edgelit SEG fabric graphics, printed using high-definition dye sublimation for vivid colour, crisp detail and uniform light diffusion across the surface. Two graphic panels are always required – one per side of the frame – regardless of whether it is configured for single or double-sided display. For single-sided use, a plain rear graphic can be paired with an optional black light block panel (BBN) to block rear illumination and enhance forward brightness. Graphics push easily into the silicone edge channels and can be replaced quickly between campaigns.Tool-Free Assembly with Shared Power
Vibrant SEG Graphics with Light Management Options
Ext Illumigo 2480(H) Not Available in the UK
The Illumigo Extension is a modular mid-panel component designed to increase the width of your Illumigo Modular 2480 Lightbox. It connects between existing frame sections to extend your display while maintaining a seamless illuminated surface and consistent edgelit performance. You can add multiple extension panels to a single configuration to build wider displays up to a maximum of 7.85 metres. Extensions must be positioned between main frame sections and cannot be used at the outer ends. This makes them ideal for expanding backwalls or adapting L, U and T-shaped layouts without breaking up the visual flow. All frames are designed to be extended from smaller sizes up to larger sizes. When extending frame widths, additional transformers may be required (sold separately). Choose from 850mm or 1000mm widths, both standing at 2480mm high to match the rest of the Illumigo system. Each extension panel uses the same push-fit, tool-free assembly system as the main Illumigo frames. Horizontal LEDs are pre-installed, and a discreet power cable connects the extension to your existing Illumigo transformer without the need for a separate power source for every panel. Transformer requirements: for linear widths up to 2m and 3m, 1 transformer is required. Widths up to 4m require 2 transformers, and any width over 4m requires 4 transformers in total. Transformers are available separately and should be factored into your display planning. Feet attach via thumb screws, and each unit is supplied in a wheeled protective bag with foam inserts for safe transport and compact storage. The finished Illumigo frame, complete with any extensions, uses premium 175gsm edgelit SEG fabric graphics, printed using high-definition dye sublimation for vivid colour, crisp detail and uniform light diffusion across the surface. Two graphic panels are always required – one per side of the frame – regardless of whether it is configured for single or double-sided display. For single-sided use, a plain rear graphic can be paired with an optional black light block panel (BBN) to block rear illumination and enhance forward brightness. Graphics push easily into the silicone edge channels and can be replaced quickly between campaigns.
Not available in the UK – please login to view
2380H Illumigo Modular
Tool-Free Assembly with Shared Power
Vibrant SEG Graphics with Light Management Options
Illumigo™ Modular Shell Scheme
✨ Simple, illuminated solution: Illumigo™ Modular is a backlit lightbox system designed to install inside the walls of an existing shell scheme, sitting within the footprint and using the shell structure as the perimeter. The 0.85 m modules and 2.3 m height fit snugly to create seamless inner walls with bright, even illumination for standout in busy halls. Standard frames can be expanded with 0.85 m or 1 m extensions, letting you configure the system to a wide range of shell scheme sizes and bay counts, and scale up or down as your floor plan changes through the season. Examples shown: 3x5, 3x3 and 2x6. ⚡ Quick build, easy storage: Frames lock together fast for rapid setup and takedown with a small team. Components pack compactly and include a wheeled storage bag for smooth transport. For 90° corners or L or U layouts, use the Blind Foot (ILLGO-MOD-BF) to create flush connections. 🎨 Double sided SEG graphics for light control and flexibility: Each frame accepts SEG fabric graphics on both sides. In a shell scheme the inner face is visible, while the reverse needs either a graphic or a blockout liner to prevent light spill. Printing both sides gives you options to swap panels mid event for a fresh look or to reuse the frame as a standalone display at a later stage. 📐 Examples below: The system sits close to the outer shell walls so you maximise usable space within the walled footprint. The 3x5, 3x3 and 2x6 layouts illustrate how easily it adapts to common footprints. Need help planning your shell scheme? If you would like us to work out the exact components for your stand, please click the Enquire now button and tell us your shell scheme size.3x5 shell scheme - Components
Code Description Quantity HARDWARE ILLGO-MOD-2824 2.85 m Width | 2.3 m Height Frame 2 ILLGO-MOD-4824 4.85 m Width | 2.3 m Height Frame 1 ILLGO-90TC 90° Connector (unit) 2 ILLGO-MOD-BF Blind Foot (unit) 2 ILLGO-MOD-HF Half Foot (unit) 12 GRAPHICS G-ILLGO-MOD-2824-BL 2.85 m SEG Graphic (Front & Back) 4 G-ILLGO-MOD-4824-BL 4.85 m SEG Graphic (Front & Back) 2 3x3 shell scheme - Components
Code Description Quantity HARDWARE ILLGO-MOD-2824 2.85 m Width | 2.3 m Height Frame 3 ILLGO-90TC 90° Connector (unit) 1 ILLGO-MOD-90MIC M Connector (x4) 1 ILLGO-MOD-BF Blind Foot (unit) 10 ILLGO-MOD-HF Half Foot (unit) 2 GRAPHICS G-ILLGO-MOD-2824-BL 2.85 m SEG Graphic (Front & Back) 6 2x6 shell scheme - Components
Code Description Quantity HARDWARE ILLGO-MOD-5824 5.85 m Width | 2.3 m Height Frame 1 ILLGO-MOD-1824 1.85 m Width | 2.3 m Height Frame 2 ILLGO-90TC 90° Connector (unit) 2 ILLGO-MOD-BF Blind Foot (unit) 2 ILLGO-MOD-HF Half Foot (unit) 11 GRAPHICS G-ILLGO-MOD-5824-BL 5.85 m SEG Graphic 2 G-ILLGO-MOD-1824-BL 1.85 m SEG Graphic 4
If you are already a customer then click on the button to go to the login page.