Ultima Displays. Products tagged with 'Rahmen aus Stoff'

Illumigo™ Retail

The Illumigo™ Retail is a sleek, portable LED lightbox designed specifically for retail environments. With a compact 1600 x 600mm double-sided display area, it delivers bright, attention-grabbing visuals that are perfect for shop floors, window displays, and point-of-sale setups.

Requires 2 x Graphics

Effortless Assembly & Smart Transport

Assembly is quick and intuitive, with no tools required. Simply twist out the stabilising feet from the base panel and connect the frame using the numbered system. Insert the horizontal support bar, fit your SEG graphics into the frame channels, and plug the power cable into the concealed port under the base. Your display is ready to illuminate in under 10 minutes.

Each unit is supplied in a protective, compartmented carry case with handle for safe and easy transport—ideal for use across multiple locations for seasonal updates.

Double-Sided or Single-Sided Display - Your Choice

Double-Sided Display: Use 2 x backlit SEG graphics to deliver your message in both directions - perfect for open spaces and walk-by traffic.

Single-Sided Display: Use 1 x backlit SEG graphic for the front, and a 1 x black-back fabric on the reverse to block light and focus attention forward.

IllumiGo™ 2x1

Illumigo™ 2x1 – No Longer Available in the UK

Looking for a similar solution? Explore the new addition to the Illumigo™ range - the Illumigo™ Up, the perfect alternative to this model.

New

Illumigo™ Lite Mag

Magnetic, Modular Linking for Quick, Flexible Displays

The Illumigo™ Lite Mag delivers high-impact illuminated displays in a compact and cost-effective format. It is designed as a free-standing double-sided lightbox with a clean 80mm white aluminium profile and vibrant backlit graphics that create an eye-catching presence for exhibitions, retail spaces, and branded promotional areas.

With its integrated magnetic linking system, multiple frames can connect in seconds to create L-shapes, T-shapes, straight runs, and larger illuminated structures. Connectors (sold separately) provide additional support for shaped layouts, while the optional A4 literature holder (sold separately) allows you to display brochures and promotional material beside your lightbox.

Each frame measures 2020mm high x 1000mm wide and can be used individually or linked with other Lite Mag units to create extended backwalls or corner displays.

Double-Sided Unit: requires 2 x graphics.

Fast Setup with Magnetic Connections and Compact Storage

The Illumigo Lite Mag arrives prebuilt with pre-fitted LED lights and twist-out feet for quick and simple setup. The frame sections slot together securely, with each part clearly numbered for easy identification and fast tool-free assembly.

Use the integrated magnetic system to link frames rapidly, adding connectors where needed for shaped or more complex configurations. This makes the Lite Mag an ideal portable lightbox solution for brands needing frequent layout changes or quick installation.

The lightbox packs away neatly into a wheeled nylon carry bag with foam inserts, making transport and storage both safe and convenient.

Backlit Graphics with High-Definition Dye Sublimation

The Illumigo Lite Mag supports two graphic options. The Backlit printed graphic is produced on 175gsm backlit SEG fabric using high-definition dye sublimation for excellent colour vibrancy and even illumination.

For single-sided use, the solid black back panel (the Backlit Blockout Liner) prevents light spill and boosts contrast on the front graphic.

Both options attach using SEG push-fit edging for a smooth finish and quick graphic changes. For double-sided lightboxes, simply order two graphics.

New

Illumigo™ Modular 2380(H) mm

Impressive Modular Lightbox System Designed for Wide-Format Visual Standout

The Illumigo Modular is a striking large-format illuminated display system, standing at 2380 mm high and engineered for exceptional visual impact. Designed with flexibility in mind, it delivers seamless edge-lit SEG graphics across widths up to 7.85 metres, making it a standout choice for retail spaces, exhibitions and promotional environments, all without the premium price tag.

Whether you are creating a wide backwall or an immersive multi-sided layout, the system supports large-scale continuous displays and dynamic configurations. Five frame widths are available: 1850 mm, 2850 mm, 3850 mm, 4850 mm and 5850 mm, alongside two extension panels (850 mm and 1000 mm), which accommodate seamless graphics across multiple sections. The sleek, 120 mm deep aluminium profile is powder coated in white for a clean, professional finish.

Make a bold visual statement with L, T and U-shaped structures that showcase illuminated graphics from multiple angles. With three connector types (sold separately), it is easy to build creative shaped configurations that turn heads. Two optional foot styles provide added stability and aesthetic flexibility, and an A4 literature holder (sold separately) is available to complete your setup.

Double-sided unit: requires 2 graphics.

Fast Tool-Free Assembly and Compact Storage

Assembly is quick and straightforward thanks to a push-fit frame system with pre-installed, energy-efficient horizontal LEDs. Clearly numbered sections and thumb screws for the feet simplify setup, making it ideal for small teams or rapid installations. Discreet power cables run to a transformer, then to a standard mains plug. Each frame comes with feet as standard.

For added convenience, each unit is supplied in a premium black carry bag with protective foam inserts, a carry handle, shoulder strap and integrated wheels, ensuring safe, practical transport and compact storage between uses.

Backlit Graphics with High-Definition Dye Sublimation

The Illumigo Modular supports two graphic options. The primary option is 175 gsm premium backlit SEG fabric, printed using high-definition dye sublimation to achieve vivid colour, sharp detail and an evenly illuminated glow, ideal for high-impact branding in busy environments.

For single-sided displays, a black back panel (BBN) is also available. This solid black SEG fabric prevents light leakage from the rear, enhancing contrast and brightness on the front-facing graphic.

Graphics push-fit into the frame channel for a smooth, taut finish, and can be updated between campaigns. For double-sided use, order 2 graphics.

New

Illumigo™ Modular Extension 2380(H) mm

Modular Extensions for Expanding Illumigo Lightbox Width

The Illumigo Extension is a modular mid-panel component designed to increase the width of your Illumigo Modular 2380 Lightbox. It connects between existing frame sections to extend your display while maintaining a seamless illuminated surface and consistent edgelit performance.

You can add multiple extension panels to a single configuration to build wider displays up to a maximum of 7.85 metres. Extensions must be positioned between main frame sections and cannot be used at the outer ends. This makes them ideal for expanding backwalls or adapting L, U and T-shaped layouts without breaking up the visual flow.

All frames are designed to be extended from smaller sizes up to larger sizes. When extending frame widths, additional transformers may be required (sold separately).

Choose from 850mm or 1000mm widths, both standing at 2380mm high to match the rest of the Illumigo system.

Tool-Free Assembly with Shared Power

Each extension panel uses the same push-fit, tool-free assembly system as the main Illumigo frames. Horizontal LEDs are pre-installed, and a discreet power cable connects the extension to your existing Illumigo transformer without the need for a separate power source for every panel.

Transformer requirements: For linear widths up to 2m and 3m, only 1 transformer is required. Widths up to 4m require 2 transformers, and any width over 4m requires 4 transformers in total. Transformers are available separately and should be factored into your display planning.

Feet attach via thumb screws, and each unit is supplied in a wheeled protective bag with foam inserts for safe transport and compact storage.

Vibrant SEG Graphics with Light Management Options

The finished Illumigo frame, complete with any extensions, uses premium 175gsm edgelit SEG fabric graphics, printed using high-definition dye sublimation for vivid colour, crisp detail and uniform light diffusion across the surface.

Two graphic panels are always required – one per side of the frame – regardless of whether it is configured for single or double-sided display. For single-sided use, a plain rear graphic can be paired with an optional black light block panel (BBN) to block rear illumination and enhance forward brightness.

Graphics push easily into the silicone edge channels and can be replaced quickly between campaigns.

New

Illumigo™ Modular Shell Scheme

Illuminated lightbox that sits within your shell scheme walls, fast and flexible

✨ Simple, illuminated solution: Illumigo™ Modular is a backlit lightbox system designed to install inside the walls of an existing shell scheme, sitting within the footprint and using the shell structure as the perimeter. The 0.85 m modules and 2.3 m height fit snugly to create seamless inner walls with bright, even illumination for standout in busy halls. Standard frames can be expanded with 0.85 m or 1 m extensions, letting you configure the system to a wide range of shell scheme sizes and bay counts, and scale up or down as your floor plan changes through the season. Examples shown: 3x5, 3x3 and 2x6.

⚡ Quick build, easy storage: Frames lock together fast for rapid setup and takedown with a small team. Components pack compactly and include a wheeled storage bag for smooth transport. For 90° corners or L or U layouts, use the Blind Foot (ILLGO-MOD-BF) to create flush connections.

🎨 Double sided SEG graphics for light control and flexibility: Each frame accepts SEG fabric graphics on both sides. In a shell scheme the inner face is visible, while the reverse needs either a graphic or a blockout liner to prevent light spill. Printing both sides gives you options to swap panels mid event for a fresh look or to reuse the frame as a standalone display at a later stage.

📐 Examples below: The system sits close to the outer shell walls so you maximise usable space within the walled footprint. The 3x5, 3x3 and 2x6 layouts illustrate how easily it adapts to common footprints.

3x5 shell scheme - Components

Code	Description	Quantity
HARDWARE
ILLGO-MOD-2824	2.85 m Width \| 2.3 m Height Frame	2
ILLGO-MOD-4824	4.85 m Width \| 2.3 m Height Frame	1
ILLGO-90TC	90° Connector (unit)	2
ILLGO-MOD-BF	Blind Foot (unit)	2
ILLGO-MOD-HF	Half Foot (unit)	12
GRAPHICS
G-ILLGO-MOD-2824-BL	2.85 m SEG Graphic (Front & Back)	4
G-ILLGO-MOD-4824-BL	4.85 m SEG Graphic (Front & Back)	2

3x3 shell scheme - Components

Code	Description	Quantity
HARDWARE
ILLGO-MOD-2824	2.85 m Width \| 2.3 m Height Frame	3
ILLGO-90TC	90° Connector (unit)	2
ILLGO-MOD-BF	Blind Foot (unit)	2
ILLGO-MOD-HF	Half Foot (unit)	10
GRAPHICS
G-ILLGO-MOD-2824-BL	2.85 m SEG Graphic (Front & Back)	6

2x6 shell scheme - Components

Code	Description	Quantity
HARDWARE
ILLGO-MOD-5824	5.85 m Width \| 2.3 m Height Frame	1
ILLGO-MOD-1824	1.85 m Width \| 2.3 m Height Frame	2
ILLGO-90TC	90° Connector (unit)	2
ILLGO-MOD-BF	Blind Foot (unit)	2
ILLGO-MOD-HF	Half Foot (unit)	11
GRAPHICS
G-ILLGO-MOD-5824-BL	5.85 m SEG Graphic	2
G-ILLGO-MOD-1824-BL	1.85 m SEG Graphic	4

Need help planning your shell scheme? If you would like us to work out the exact components for your stand, please click the Enquire now button and tell us your shell scheme size.