Ultima Displays. Products tagged with 'illumigo'

Illumigo™ Retail

The Illumigo™ Retail is a sleek, portable LED lightbox designed specifically for retail environments. With a compact 1600 x 600mm double-sided display area, it delivers bright, attention-grabbing visuals that are perfect for shop floors, window displays, and point-of-sale setups.

Requires 2 x Graphics

Effortless Assembly & Smart Transport

Assembly is quick and intuitive, with no tools required. Simply twist out the stabilising feet from the base panel and connect the frame using the numbered system. Insert the horizontal support bar, fit your SEG graphics into the frame channels, and plug the power cable into the concealed port under the base. Your display is ready to illuminate in under 10 minutes.

Each unit is supplied in a protective, compartmented carry case with handle for safe and easy transport—ideal for use across multiple locations for seasonal updates.

Double-Sided or Single-Sided Display - Your Choice

Double-Sided Display: Use 2 x backlit SEG graphics to deliver your message in both directions - perfect for open spaces and walk-by traffic.

Single-Sided Display: Use 1 x backlit SEG graphic for the front, and a 1 x black-back fabric on the reverse to block light and focus attention forward.

Illumigo™ One

The Illumigo™ One is a vibrant, portable LED lightbox designed for high-impact single-sided display. Standing 2000mm tall by 850mm wide, it features a sleek 60mm slimline profile with a clean white powder-coated finish—perfect for retail, exhibitions, and events where space is at a premium but visual presence matters.

Requires 2 x Graphics

Intuitive Assembly & Compact Transport

Its lightweight design and intelligent engineering make setup fast and effortless. With pre-installed twist-out stabilising feet, a rollable LED panel, and a clearly numbered connection system, you’ll be ready to shine in under 10 minutes—no tools needed. Just assemble the frame, insert your SEG graphic, plug in the power, and you’re good to go. Supplied in a protective carry case, the Illumigo™ One is built for convenience on the move

Display Options: Front-Lit with Optional Rear Graphic

The Illumigo™ One is designed as a single-sided lightbox, making it ideal for displays positioned against walls or backdrops. For added versatility, you can fit an unlit textile graphic to the reverse side—perfect for branding, messaging, or visual consistency without additional illumination.

Single-Sided Display: Use 1 x backlit SEG graphic on the front panel for a bold illuminated message.

Single-Sided Display with Rear Graphic: Use 1 x backlit SEG graphic on the front panel, and 1 x stretch polyester graphic on the reverse for an unlit branded backdrop—ideal when rear visibility still matters.

IllumiGo™ 2x1

Illumigo™ 2x1 – No Longer Available in the UK

Looking for a similar solution? Explore the new addition to the Illumigo™ range - the Illumigo™ Up, the perfect alternative to this model.

Illumigo™ 2x2

Promotional Lightbox – Easy Assembly with Brilliant SEG Graphics

The Illumigo™ 2x2 Double-Sided Lightbox is a bold, eye-catching illuminated display designed to make your brand impossible to ignore. Featuring brilliant backlit SEG (Silicone Edge Graphics), a sleek aluminum frame, and energy-efficient integrated LEDs, this system delivers maximum visual impact with minimal power consumption. It’s the perfect solution for retail displays, exhibition stands, showrooms, and events.

Engineered for speed and simplicity, the Illumigo™ assembles tool-free in under 10 minutes, making it ideal for fast-paced environments and frequent use. Whether you're launching a new campaign or enhancing your brand presence, this lightbox ensures your visuals are vibrant, professional, and perfectly illuminated—every time.

For Double-Side Display, Order 2 x Graphics.

Quick Setup & Portable Protection

This intuitive system is designed for rapid deployment. Simply twist out the stabilising feet, follow the numbered connections to build the lightweight frame, insert the horizontal support bar, fit your SEG graphics into the perimeter channel, and connect the power cable beneath the base panel.

To make transport and storage hassle-free, each unit is supplied in a protective box with a carry handle—keeping your components organised, secure, and easy to move between locations. Perfect for seasonal promotions or multi-site campaigns.

Backlit SEG Graphics – Double or Single-Sided Display

1. Vibrant Graphics Printed on 175gsm Backlit SEG Fabric.

Graphics are printed using dye sublimation on premium 175gsm SEG fabric, producing rich colours and crisp detail that command attention. Designed for illumination, the fabric ensures an even glow and high-impact presentation in any environment.

Ideal for retail, exhibitions, events, and promotional displays

High-definition dye sublimation process ensures vibrant clarity

2. Versatile Display Options.

Double-Sided Display: Use 2 x backlit SEG graphics (front and back) for visibility in both directions—ideal for open spaces and areas with heavy footfall.

Single-Sided Display: Use 1 x backlit SEG graphic on the front, and 1 x black-back panel on the rear to block light and enhance visual focus.

New

Illumigo™ Modular Feet

Specialist Foot Options for Creative Illumigo Modular Setups

Optimise your Illumigo Modular display layout with specialist foot accessories designed for space-conscious and angled configurations. These premium feet are built to the same structural standard as the core system and offer targeted solutions when positioning frames against walls or connecting at right angles.

Both options are sold individually and are compatible with all standard Illumigo Modular frames and extension panels.

Half Foot – Maximise Space Against Walls

The Illumigo Half Foot is ideal when placing your modular lightbox directly against a wall. With its reduced depth, it minimises the footprint of the display while maintaining stability - perfect for retail, shell scheme setups, or tight event spaces where every millimetre counts.

Sold as a single unit, it can be used alongside a standard foot or paired with another Half Foot for a flush wall-facing finish.

Blind Foot – Join Frames at a 90° Angle

The Blind Foot is specifically designed for use in corner configurations where two frames are joined at 90°. It replaces one of the adjoining feet to allow a clean, flush connection without interference - ideal for creating seamless L-shaped or U-shaped structures.

Durable and discreet, the Blind Foot provides reliable stability while enhancing the visual continuity of your angled setup. Sold as a single unit.

New

Illumigo™ Modular Shell Scheme

Illuminated lightbox that sits within your shell scheme walls, fast and flexible

✨ Simple, illuminated solution: Illumigo™ Modular is a backlit lightbox system designed to install inside the walls of an existing shell scheme, sitting within the footprint and using the shell structure as the perimeter. The 0.85 m modules and 2.3 m height fit snugly to create seamless inner walls with bright, even illumination for standout in busy halls. Standard frames can be expanded with 0.85 m or 1 m extensions, letting you configure the system to a wide range of shell scheme sizes and bay counts, and scale up or down as your floor plan changes through the season. Examples shown: 3x5, 3x3 and 2x6.

⚡ Quick build, easy storage: Frames lock together fast for rapid setup and takedown with a small team. Components pack compactly and include a wheeled storage bag for smooth transport. For 90° corners or L or U layouts, use the Blind Foot (ILLGO-MOD-BF) to create flush connections.

🎨 Double sided SEG graphics for light control and flexibility: Each frame accepts SEG fabric graphics on both sides. In a shell scheme the inner face is visible, while the reverse needs either a graphic or a blockout liner to prevent light spill. Printing both sides gives you options to swap panels mid event for a fresh look or to reuse the frame as a standalone display at a later stage.

📐 Examples below: The system sits close to the outer shell walls so you maximise usable space within the walled footprint. The 3x5, 3x3 and 2x6 layouts illustrate how easily it adapts to common footprints.

3x5 shell scheme - Components

Code	Description	Quantity
HARDWARE
ILLGO-MOD-2824	2.85 m Width \| 2.3 m Height Frame	2
ILLGO-MOD-4824	4.85 m Width \| 2.3 m Height Frame	1
ILLGO-90TC	90° Connector (unit)	2
ILLGO-MOD-BF	Blind Foot (unit)	2
ILLGO-MOD-HF	Half Foot (unit)	12
GRAPHICS
G-ILLGO-MOD-2824-BL	2.85 m SEG Graphic (Front & Back)	4
G-ILLGO-MOD-4824-BL	4.85 m SEG Graphic (Front & Back)	2

3x3 shell scheme - Components

Code	Description	Quantity
HARDWARE
ILLGO-MOD-2824	2.85 m Width \| 2.3 m Height Frame	3
ILLGO-90TC	90° Connector (unit)	2
ILLGO-MOD-BF	Blind Foot (unit)	2
ILLGO-MOD-HF	Half Foot (unit)	10
GRAPHICS
G-ILLGO-MOD-2824-BL	2.85 m SEG Graphic (Front & Back)	6

2x6 shell scheme - Components

Code	Description	Quantity
HARDWARE
ILLGO-MOD-5824	5.85 m Width \| 2.3 m Height Frame	1
ILLGO-MOD-1824	1.85 m Width \| 2.3 m Height Frame	2
ILLGO-90TC	90° Connector (unit)	2
ILLGO-MOD-BF	Blind Foot (unit)	2
ILLGO-MOD-HF	Half Foot (unit)	11
GRAPHICS
G-ILLGO-MOD-5824-BL	5.85 m SEG Graphic	2
G-ILLGO-MOD-1824-BL	1.85 m SEG Graphic	4

Need help planning your shell scheme? If you would like us to work out the exact components for your stand, please click the Enquire now button and tell us your shell scheme size.