LIGHTBOXES

The IllumiGO Lite Mag arrives prebuilt with pre-fitted LED lights and twist-out feet for quick and simple setup. The frame sections slot together securely, with each part clearly numbered for easy identification and fast tool-free assembly.

Use the integrated magnetic system to link frames rapidly, adding connectors where needed for shaped or more complex configurations. This makes the Lite Mag an ideal portable lightbox solution for brands needing frequent layout changes or quick installation.

The lightbox packs away neatly into a wheeled nylon carry bag with foam inserts, making transport and storage both safe and convenient.

The IllumiGO Lite Mag supports two graphic options. The Backlit printed graphic is produced on 175gsm backlit SEG fabric using high-definition dye sublimation for excellent colour vibrancy and even illumination.

For single-sided use, the solid black back panel (the Backlit Blockout Liner) prevents light spill and boosts contrast on the front graphic.

Both options attach using SEG push-fit edging for a smooth finish and quick graphic changes. For double-sided lightboxes, simply order two graphics.

Its lightweight design and intelligent engineering make setup fast and effortless. With pre-installed twist-out stabilising feet, a rollable LED panel, and a clearly numbered connection system, you’ll be ready to shine in under 10 minutes - no tools needed. Just assemble the frame, insert your SEG graphic, plug in the power, and you’re good to go. Supplied in a protective carry case, the Illumigo™ One is built for convenience on the move

The Illumigo™ One is designed as a single-sided lightbox, making it ideal for displays positioned against walls or backdrops. For added versatility, you can fit an unlit textile graphic to the reverse side—perfect for branding, messaging, or visual consistency without additional illumination.

Single-Sided Display: Use 1 x backlit SEG graphic on the front panel for a bold illuminated message.

Single-Sided Display with Rear Graphic: Use 1 x backlit SEG graphic on the front panel, and 1 x stretch polyester graphic on the reverse for an unlit branded backdrop—ideal when rear visibility still matters.

Each unit is supplied in a protective, compartmented carry case with handle for safe and easy transport—ideal for use across multiple locations for seasonal updates.

Double-Sided Display: Use 2 x backlit SEG graphics to deliver your message in both directions - perfect for open spaces and walk-by traffic.

Single-Sided Display: Use 1 x backlit SEG graphic for the front, and a 1 x black-back fabric on the reverse to block light and focus attention forward.

This intuitive system is designed for rapid deployment. Simply twist out the stabilising feet, follow the numbered connections to build the lightweight frame, insert the horizontal support bar, fit your SEG graphics into the perimeter channel, and connect the power cable beneath the base panel.

To make transport and storage hassle-free, each unit is supplied in a protective box with a carry handle—keeping your components organised, secure, and easy to move between locations. Perfect for seasonal promotions or multi-site campaigns.

1. Vibrant Graphics Printed on 175gsm Backlit SEG Fabric.

Graphics are printed using dye sublimation on premium 175gsm SEG fabric, producing rich colours and crisp detail that command attention. Designed for illumination, the fabric ensures an even glow and high-impact presentation in any environment.

Ideal for retail, exhibitions, events, and promotional displays

High-definition dye sublimation process ensures vibrant clarity

2. Versatile Display Options.

Double-Sided Display: Use 2 x backlit SEG graphics (front and back) for visibility in both directions—ideal for open spaces and areas with heavy footfall.

Single-Sided Display: Use 1 x backlit SEG graphic on the front, and 1 x black-back panel on the rear to block light and enhance visual focus.

The 90° Top Corner Connector enables two Illumigo™ Modular or Illumigo™ Lite Mag frames to be securely joined at the top, forming a clean and stable corner for L-shaped or U-shaped configurations.

Compatible with: Illumigo™ Modular and Illumigo™ Lite Mag

Supplied as a single unit. It features an integrated locking mechanism for a secure and simple connection between frames.

Technical Notes:
– For Illumigo™ Modular, must be used with a blind foot at the bottom (ILLGO-MOD-BF)
– Modular: 120 mm of the graphic on one frame will be hidden
– Lite Mag: 80 mm of the graphic on one frame will be hidden

The 90° Middle Inside Corner Connectors allow two Illumigo™ Lite Mag frames to be joined at a 90° angle without any graphic overlap. Designed to strengthen internal joins, they improve stability in U-shaped and multi-panel configurations.

Compatible with: Illumigo™ Lite Mag

Supplied as a pack of 4. Enough to secure a single 90-degree inside corner at the middle channel of two joined frames.

Technical Notes:
– No graphic overlap between frames
– An 80 × 80 mm space remains at the rear corner once assembled

The T-Shape Connector allows you to link two Illumigo™ Modular or Illumigo™ Lite Mag frames into a T-shaped formation, adding versatility and visual impact to your display.

Compatible with: Illumigo™ Modular and Illumigo™ Lite Mag

Supplied as a single unit. Includes an integrated locking mechanism to ensure a firm and flush join across all three sections.

Technical Notes:
– For Illumigo™ Modular, can be used with a blind foot (ILLGO-MOD-BF) depending on configuration

The 90° Middle Inside Corner Connectors are designed for the Illumigo™ Modular 120 mm profile, providing essential internal support at right-angle joins. Ideal for U-shaped and multi-panel layouts where additional rigidity is required.

Compatible with: Illumigo™ Modular

Supplied as a pack of 4. Enough to secure a single 90-degree inside corner at the middle channel of two joined frames.

Technical Notes:
– Finished in white to match the frame system
– A 120 × 120 mm space remains at the rear corner once assembled

Assembly is quick and straightforward thanks to a push-fit frame system with pre-installed, energy-efficient horizontal LEDs. Clearly numbered sections and thumb screws for the feet simplify setup, making it ideal for small teams or rapid installations. Discreet power cables run to a transformer, then to a standard mains plug. Each frame comes with feet as standard.

For added convenience, each unit is supplied in a premium black carry bag with protective foam inserts, a carry handle, shoulder strap and integrated wheels, ensuring safe, practical transport and compact storage between uses.

The Illumigo Modular supports two graphic options. The primary option is 175 gsm premium backlit SEG fabric, printed using high-definition dye sublimation to achieve vivid colour, sharp detail and an evenly illuminated glow, ideal for high-impact branding in busy environments.

For single-sided displays, a black back panel (BBN) is also available. This solid black SEG fabric prevents light leakage from the rear, enhancing contrast and brightness on the front-facing graphic.

Graphics push-fit into the frame channel for a smooth, taut finish, and can be updated between campaigns. For double-sided use, order 2 graphics.

Each extension panel uses the same push-fit, tool-free assembly system as the main Illumigo frames. Horizontal LEDs are pre-installed, and a discreet power cable connects the extension to your existing Illumigo transformer without the need for a separate power source for every panel.

Transformer requirements: For linear widths up to 2m and 3m, only 1 transformer is required. Widths up to 4m require 2 transformers, and any width over 4m requires 4 transformers in total. Transformers are available separately and should be factored into your display planning.

Feet attach via thumb screws, and each unit is supplied in a wheeled protective bag with foam inserts for safe transport and compact storage.

The finished Illumigo frame, complete with any extensions, uses premium 175gsm edgelit SEG fabric graphics, printed using high-definition dye sublimation for vivid colour, crisp detail and uniform light diffusion across the surface.

Two graphic panels are always required – one per side of the frame – regardless of whether it is configured for single or double-sided display. For single-sided use, a plain rear graphic can be paired with an optional black light block panel (BBN) to block rear illumination and enhance forward brightness.

Graphics push easily into the silicone edge channels and can be replaced quickly between campaigns.

The Illumigo Half Foot is ideal when placing your modular lightbox directly against a wall. With its reduced depth, it minimises the footprint of the display while maintaining stability - perfect for retail, shell scheme setups, or tight event spaces where every millimetre counts.

Sold as a single unit, it can be used alongside a standard foot or paired with another Half Foot for a flush wall-facing finish.

The Blind Foot is specifically designed for use in corner configurations where two frames are joined at 90°. It replaces one of the adjoining feet to allow a clean, flush connection without interference - ideal for creating seamless L-shaped or U-shaped structures.

Durable and discreet, the Blind Foot provides reliable stability while enhancing the visual continuity of your angled setup. Sold as a single unit.

Illuminova™ is designed with convenience in mind. The integrated LED lighting system links across connected frames, so only one power source is required - even for larger displays. Drivers are neatly housed inside the frame, keeping everything compact and clutter-free.

Assembly is fast and efficient - frames fasten together using a simple Allen key system for quick installation. Custom sizes are available on request, with a choice of black or white powder-coated finishes to match your environment or brand.

This single-sided lightbox uses one backlit SEG graphic to deliver sharp, high-impact visuals. We recommend adding a blockout liner to the reverse to eliminate light-spill on uneven wall surfaces - ensuring your message stays front and centre. Perfect for high-traffic areas where maximum visibility matters.

Illuminova™ is designed for convenience, with drivers housed inside the frame to keep everything neat and compact. The low-energy LEDs provide bright, even illumination while maintaining a low heat output, making it both efficient and safe for long-term use.

Double-Sided Display: Use 2 x backlit SEG graphics to deliver your message in both directions - perfect for open spaces and walk-by traffic.

Single-Sided Display: Use 1 x backlit SEG graphic for the front, and a 1 x black-back fabric on the reverse to block light and focus attention forward.

Supplied in a standard 3 x 2.5M size, this robust freestanding unit includes four supportive steel feet for added stability in any space. Crafted from durable aluminium, the frame combines strength with lightweight portability. The system uses vivid SEG fabric graphics that are quick and easy to replace - perfect for seasonal campaigns or regularly updated messaging while remaining energy-efficient for sustainable, long-term use.

Double-Sided Display: Use 2 x backlit SEG graphics to deliver your message in both directions - perfect for open spaces and walk-by traffic.

Single-Sided Display: Use 1 x backlit SEG graphic for the front, and a 1 x black-back fabric on the reverse to block light and focus attention forward.

This robust hanging structure is engineered from durable yet lightweight aluminium, offering strength without bulk. It assembles easily with allen keys and includes suspended pitons for installation (cables not included). Update with vivid SEG fabric graphics that are simple to change, it’s perfect for seasonal promotions or evolving brand messaging—while its energy-efficient LED system ensures cost-effective, long-term use.

Double-Sided Display: Use 2 x backlit SEG graphics (front and back) to deliver your message in both directions - perfect for open spaces and walk-by traffic.

Setup is quick and intuitive using push fit aluminium tubing with simple push button locks. Numbered frame sections guide the assembly process, allowing the wall to be built confidently even by first time users. The modular structure allows frame sections to be removed so the display can be assembled at 3m, 2m or 1m widths depending on the space available. Push in connectors and stabilising feet create a secure and supportive structure.

The integrated LED light blankets attach neatly inside the frame and distribute light evenly across the display surface. This balanced illumination avoids hotspots while helping printed graphics appear vibrant and clear from every viewing angle.

For transport, the complete system packs neatly into a padded black wheeled bag. Both side and pull handles make handling easy, while a dedicated graphic compartment allows a full size fabric graphic to be stored with the frame.

The Formulate LED Backwall supports two graphic solutions, giving you flexibility depending on whether you require a fully illuminated display or a standard fabric graphic. Graphics are available for all three display widths (1m, 2m and 3m), allowing the display to be redressed when using different frame configurations.

Backlit SEG Graphic
The illuminated option uses a precision finished SEG graphic produced on 175 gsm backlit textile fabric. Printed using high definition dye sublimation, this material provides excellent colour vibrancy and allows light from the internal LED blankets to diffuse evenly across the surface. The silicone edge graphic inserts neatly into the frame channel to create a smooth, taut graphic face with a clean professional finish.

Tension Fit Sock Graphic
The tension fit sock graphic stretches smoothly over the tubular frame and secures with a discreet zip closure at the base. Custom printed graphics are designed to fit snugly over the structure and are available as single sided graphics with a plain white reverse, or double sided graphics for visibility from both directions.

The premium 190 gsm dye sublimation printed stretch fabric is washable, foldable and easily interchangeable, making it ideal for updating branding between campaigns, exhibitions or events.