Ultima Displays. Products tagged with 'led rám'

Illumigo™ Retail

The Illumigo™ Retail is a sleek, portable LED lightbox designed specifically for retail environments. With a compact 1600 x 600mm double-sided display area, it delivers bright, attention-grabbing visuals that are perfect for shop floors, window displays, and point-of-sale setups.

Requires 2 x Graphics

Effortless Assembly & Smart Transport

Assembly is quick and intuitive, with no tools required. Simply twist out the stabilising feet from the base panel and connect the frame using the numbered system. Insert the horizontal support bar, fit your SEG graphics into the frame channels, and plug the power cable into the concealed port under the base. Your display is ready to illuminate in under 10 minutes.

Each unit is supplied in a protective, compartmented carry case with handle for safe and easy transport—ideal for use across multiple locations for seasonal updates.

Double-Sided or Single-Sided Display - Your Choice

Double-Sided Display: Use 2 x backlit SEG graphics to deliver your message in both directions - perfect for open spaces and walk-by traffic.

Single-Sided Display: Use 1 x backlit SEG graphic for the front, and a 1 x black-back fabric on the reverse to block light and focus attention forward.

IllumiGo™ 2x1

Illumigo™ 2x1 – No Longer Available in the UK

Looking for a similar solution? Explore the new addition to the Illumigo™ range - the Illumigo™ Up, the perfect alternative to this model.

30mm Illuminova™ Wall mounted

Not available in the UK

Illuminova™ 30mm Wall Mounted

For a suitable lightbox alternative, we recommend the 75mm Illuminova™ Wall Mounted .

75mm Illuminova™ Wall mounted

The Illuminova™ Wall Mounted Lightbox combines a 75mm profile with edge-lit LED technology to deliver vibrant, even illumination. Available in five standard sizes—up to 3m x 2m—it’s perfect for bold focal points in retail, hospitality, or corporate spaces.

Made from durable aluminium, it’s energy-efficient and built to last. High-impact SEG fabric graphics offer rich colour and can be easily swapped without removing the frame from the wall.

Single Sided Display: Recommend 1 SEG Front Graphic | 1 block out liner to rear.

Smart Design, Simple Assembly

Illuminova™ is designed with convenience in mind. The integrated LED lighting system links across connected frames, so only one power source is required—even for larger displays. Drivers are neatly housed inside the frame, keeping everything compact and clutter-free.

Assembly is fast and efficient—frames fasten together using a simple Allen key system for quick installation. Custom sizes are available on request, with a choice of black or white powder-coated finishes to match your environment or brand.

Single-Sided, Striking Display

This single-sided lightbox uses one backlit SEG graphic to deliver sharp, high-impact visuals. We recommend adding a blockout liner to the reverse to eliminate light-spill on uneven wall surfaces - ensuring your message stays front and centre. Perfect for high-traffic areas where maximum visibility matters.

New

Illumigo™ Modular Shell Scheme

Illuminated lightbox that sits within your shell scheme walls, fast and flexible

✨ Simple, illuminated solution: Illumigo™ Modular is a backlit lightbox system designed to install inside the walls of an existing shell scheme, sitting within the footprint and using the shell structure as the perimeter. The 0.85 m modules and 2.3 m height fit snugly to create seamless inner walls with bright, even illumination for standout in busy halls. Standard frames can be expanded with 0.85 m or 1 m extensions, letting you configure the system to a wide range of shell scheme sizes and bay counts, and scale up or down as your floor plan changes through the season. Examples shown: 3x5, 3x3 and 2x6.

⚡ Quick build, easy storage: Frames lock together fast for rapid setup and takedown with a small team. Components pack compactly and include a wheeled storage bag for smooth transport. For 90° corners or L or U layouts, use the Blind Foot (ILLGO-MOD-BF) to create flush connections.

🎨 Double sided SEG graphics for light control and flexibility: Each frame accepts SEG fabric graphics on both sides. In a shell scheme the inner face is visible, while the reverse needs either a graphic or a blockout liner to prevent light spill. Printing both sides gives you options to swap panels mid event for a fresh look or to reuse the frame as a standalone display at a later stage.

📐 Examples below: The system sits close to the outer shell walls so you maximise usable space within the walled footprint. The 3x5, 3x3 and 2x6 layouts illustrate how easily it adapts to common footprints.

3x5 shell scheme - Components

Code	Description	Quantity
HARDWARE
ILLGO-MOD-2824	2.85 m Width \| 2.3 m Height Frame	2
ILLGO-MOD-4824	4.85 m Width \| 2.3 m Height Frame	1
ILLGO-90TC	90° Connector (unit)	2
ILLGO-MOD-BF	Blind Foot (unit)	2
ILLGO-MOD-HF	Half Foot (unit)	12
GRAPHICS
G-ILLGO-MOD-2824-BL	2.85 m SEG Graphic (Front & Back)	4
G-ILLGO-MOD-4824-BL	4.85 m SEG Graphic (Front & Back)	2

3x3 shell scheme - Components

Code	Description	Quantity
HARDWARE
ILLGO-MOD-2824	2.85 m Width \| 2.3 m Height Frame	3
ILLGO-90TC	90° Connector (unit)	2
ILLGO-MOD-BF	Blind Foot (unit)	2
ILLGO-MOD-HF	Half Foot (unit)	10
GRAPHICS
G-ILLGO-MOD-2824-BL	2.85 m SEG Graphic (Front & Back)	6

2x6 shell scheme - Components

Code	Description	Quantity
HARDWARE
ILLGO-MOD-5824	5.85 m Width \| 2.3 m Height Frame	1
ILLGO-MOD-1824	1.85 m Width \| 2.3 m Height Frame	2
ILLGO-90TC	90° Connector (unit)	2
ILLGO-MOD-BF	Blind Foot (unit)	2
ILLGO-MOD-HF	Half Foot (unit)	11
GRAPHICS
G-ILLGO-MOD-5824-BL	5.85 m SEG Graphic	2
G-ILLGO-MOD-1824-BL	1.85 m SEG Graphic	4

Need help planning your shell scheme? If you would like us to work out the exact components for your stand, please click the Enquire now button and tell us your shell scheme size.